Cover - Automatic Transmission Selector

Cover - Automatic Transmission Selector

Service Repair No - 76.25.09

Remove

1. Turn ignition key to position II, depress brake pedal and move gear lever to 'D' drive, turn ignition off.







2. Release clips and gear selector cover from center console.
3. Carefully disconnect 4 multiplugs from gear selector panel.
4. Remove gear lever knob and cover by pulling sharply upward.
5. Release clips securing gear lever gaiter to center console cover, remove knob and gaiter.

Refit

1. Position cover and connect multiplugs, secure cover to center console.
2. Fit gear lever knob to gear lever.
3. Fit gaiter to center console and secure with clips.
4. Turn ignition key to position II, return gear lever to Park, turn ignition off.