Console - Headlining - Rear

Console - Headlining - Rear

Service Repair No - 76.25.08

Remove







1. Carefully release rear console from headlining.
2. If fitted: Disconnect multiplug from infrared headphone transmitter module.
3. Disconnect multiplug from interior lamp.
4. Disconnect multiplug from ultrasonic sensor and remove console assembly.

NOTE: Do not carry out further dismantling if component is removed for access only.

5. Carefully release and remove ultrasonic sensor and module.
6. Remove lamp from console.
7. If fitted: Release clips and remove infrared headphone transmitter module.

Refit

1. If fitted: Fit and secure infrared headphone transmitter module.
2. Fit lamp to console.
3. Fit module and ultrasonic sensor to console.
4. Position console assembly and connect multiplugs.
5. Fit rear console to headlining.