Console - Headlining - Front

Console - Headlining - Front

Service Repair No - 76.25.02

Remove







1. Open spectacle holder, remove 2 screws securing console and release console from headlining.







2. Disconnect multiplugs from switches and lamp. Remove console assembly.

NOTE: Do not carry out further dismantling if component is removed for access only.

3. Remove lamp from console.
4. Remove switches from console.
5. Remove 2 retaining clips from console.

Refit

1. Fit retaining clips to console.
2. Fit switches to console.
3. Fit lamp to console.
4. Position front console and connect multiplugs.
5. Fit console to headlining and secure with screws.
6. Close holder.