Closing Panel - Centre Console

Closing Panel - Center Console

Service Repair No - 76.25.31

Remove







1. Remove screw securing closing panel to fascia.
2. Release 2 clips securing closing panel and remove from lower fascia.

NOTE: Do not carry out further dismantling if component is removed for access only.

3. Remove 6 screws securing trim finisher to closing panel. Remove finisher.
4. Remove damper.
5. Remove 2 trim clips.

Refit

1. Fit trim clips to finisher.
2. Fit damper.
3. Fit trim finisher to closing panel and secure with screws.
4. Fit closing panel and tighten screw, secure to clips.