Lever - Gearshift Selector Assembly
44.15.04 Lever - gearshift selector assemblyRemove
1. Remove centre console.
2. Disconnect shift interlock cable from ignition barrel.
3. Remove clip securing outer gear shift cable to mechanism.
4. Release and remove clip securing inner gear shift cable to mechanism, collect plastic spacer from cable.
5. Disconnect 2 multiplugs from selector mechanism.
6. Remove 3 nuts securing selector mechanism to carrier, remove mechanism.
Refit
1. Position mechanism to carrier, fit nuts and tighten to 25 Nm (18 ft. lbs.).
2. Connect multiplugs to mechanism.
3. Fit plastic spacer to selector cable, secure cable to mechanism.
4. Connect shift interlock cable to ignition switch barrel.
5. Fit centre console.