Shift Interlock Solenoid: Service and Repair

44.15.45 Solenoid - shift
Remove





1. Remove sump.
2. Disconnect multiplugs from solenoid valves.
3. Remove 9 Torx bolts securing solenoid retaining bracket, remove bracket.
4. Remove solenoid valve and remove O-rings where fitted.

Refit
1. Clean solenoid mating faces.
2. Fit new O-rings to solenoid and lubricate with transmission fluid.
3. Fit solenoid to valve block.
4. Fit solenoid retaining bracket, fit Torx bolts and tighten to 10 Nm (7 ft. lbs.).
5. Connect multiplugs to solenoid valves.
6. Fit sump.