Suspension Control Module: Service and Repair

60.50.04 Electronic Control Unit (ECU) - air suspension
If the ECU is to be replaced then Testbook/T4 must be connected and correct procedures adhered to, prior to battery disconnection.

Remove





1. Remove passengers side lower fascia finisher.
2. Release 2 clips and withdraw ECU from holder.
3. Disconnect 2 multiplugs from ECU.
4. Remove ECU.

Refit
1. Position new ECU, connect multiplugs and secure ECU in holder.
2. Fit passengers side fascia lower finisher.
3. Use Testbook/T4 to re-calibrate system.