Switch - Ignition Starter

86.65.02 Switch - Ignition Starter

Remove
1. Remove centre console.





2. Disconnect shift interlock cable from ignition barrel.
3. Disconnect 3 multiplugs from ignition switch and passive coil. Remove ignition switch.

NOTE: Do not carry out further dismantling if component is removed for access only.

4. Release and remove passive coil from ignition switch.

Refit
1. Fit and secure passive coil to ignition switch.
2. Connect multiplugs to passive coil and ignition switch.
3. Connect shift interlock cable to ignition barrel.
4. Fit centre console.