Transmission Speed Sensor: Service and Repair

44.15.55 Pick up - speed sensor - countershaft
This procedure also covers, pick up - speed sensor - mainshaft.

Remove





1. Remove sump.
2. Remove Torx bolt securing speed sensor clamp and release sensor from valve block.
3. Disconnect multiplug from speed sensor.

Refit
1. Clean countershaft speed sensor and sensor location.
2. Connect multiplug to countershaft speed sensor,
3. Fit speed sensor to valve block, position clamp and tighten Torx bolt to 10 Nm (7 ft. lbs.).
4. Fit sump.