Steering Column Position Sensor: Service and Repair
57.40.02 Sensor- steering angle columnRemove
1. Remove steering column assembly.
2. Release steering angle sensor from retaining clip and remove from shaft.
Refit
1. Position steering angle sensor to shaft and secure to retaining clip.
NOTE: Make sure the steering angle sensor is correctly aligned to the steering shaft.
2. Fit steering column assembly.
3. Testbook/T4 must be used to initiate a new steering angle sensor. The initiation procedure can be found in Testbook/T4 by selecting the following icons.
^ System diagnosis
^ ABS
^ Vehicle maintenance