Sensor - Camshaft Position (CMP) - RH

18.30.26 Sensor - Camshaft Position (CMP) - RH

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

Remove
1. Disconnect battery earth lead.
2. Remove air intake hose.





3. Cut 3 cable ties to release CMP sensor harness.





4. Disconnect multiplug from CMP sensor.





5. Remove bolt securing CMP sensor and remove sensor. Discard 'O' ring.

Refit
1. Clean CMP sensor and mating face.
2. Fit new 'O' ring.
3. Fit CMP sensor, fit bolt and tighten to 10 Nm (7 lbf.ft).
4. Secure CMP sensor harness with 3 cable ties.
5. Connect multiplug to CMP sensor.
6. Connect air intake hose.
7. Connect battery earth lead.
8. If a replacement sensor has been fitted, re-set adaptions using TestBook/T4.