Cover - Ignition Coils - LH

18.20.52 Cover - Ignition Coils - LH

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

Remove
1. Disconnect battery earth lead.
2. Remove engine acoustic cover.





3. Remove 2 access covers from ignition coil cover.
4. Remove 2 bolts securing ignition coil cover to camshaft cover.
5. Remove LH ignition coil cover.
6. Remove 2 bolt spacers from ignition coil cover.

NOTE: Do not carry out further dismantling if component is removed for access only.





7. Remove nut and disconnect earth lead from camshaft cover.





8. Disconnect multiplugs from ignition coils.
9. Discard ignition coil cover gasket.

Refit
1. Fit new ignition coil cover gasket.
2. Connect multiplugs to ignition coils.
3. Connect earth lead to camshaft cover and tighten nut to 4 Nm (3 lbf.ft).
4. Fit 2 bolt spacers to ignition coil cover.
5. Fit ignition coil cover, fit and tighten 2 bolts.
6. Fit 2 access covers to ignition coil cover.
7. Fit engine acoustic cover.
8. Connect battery earth lead.