Fuel Injector: Service and Repair

19.60.12 Injectors - Set

Remove
1. Remove fuel rail.





2. Remove spring clips securing injectors to fuel rail and remove injectors. Discard 2 'O' rings from each injector.

Refit
1. Lubricate new 'O' rings with silicone grease and fit to each end of injectors.
2. Fit injectors to fuel rail and secure with spring clips.
3. Fit fuel rail.
4. If new injector(s) has been fitted, then TestBook/T4 must be connected and the adaptions reset.
^ System diagnostics
^ Engine management
^ Vehicle maintenance
^ Reset adaptions