Lamp Assembly - Side & Indicator

86.40.29 Lamp Assembly - Side & Indicator

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

Remove
1. Disconnect battery earth lead.





2. Remove thumbscrew nut securing lamp assembly to headlamp mounting bracket.





3. Slide lamp assembly forward, disconnect multiplugs and remove lamp assembly.

NOTE: Do not carry out further dismantling if component is removed for access only.





4. Remove bulb holders from lamp assembly, remove bulbs from holders.

Refit
1. Fit bulbs to holders.
2. Fit bulb holders to lamp assembly.
3. Connect multiplugs.
4. Fit and secure lamp assembly.
5. Connect battery earth lead.