Headlamp Assembly

86.40.55 Headlamp Assembly

WARNING: For vehicles fitted with Xenon headlamps, the following precautions must be observed.Failure to comply may result in exposure to ultra violet rays, severe electric shock, burns or risk of explosion.

^ Ensure headlamps are switched off at all times
^ Eye and hand protection must be worn
^ Never switch on lamps or test bulbs with the lamp holder detached from headlamp

Remove
1. RH Headlamp on V8 models: Remove air cleaner assembly.
2. Remove side and indicator lam
3. Protect bumper from damage.

CAUTION: Always protect paintwork when removing or refitting any body trims or bumpers.

4. Remove headlight wiper arm.





5. Remove headlight wiper spindle escutcheon.
6. Remove front grille.





7. Remove 4 bolts securing headlamp.
8. Slide headlamp forward, disconnect multiplug and remove headlamp.

Refit
1. Position headlamp and connect multiplug.
2. Fit headlamp onto lower mountings, fit and tighten bolts to 6 Nm (4.4 lbf.ft).
3. Fit front grille.
4. Fit headlight wiper spindle escutcheon.
5. Fit headlight wiper arm.
6. Fit side and indicator lamp.
7. Check headlamp alignment - adjust if necessary.
8. RH Headlamp on V8 models: Fit air cleaner assembly.