Fog/Driving Lamp: Service and Repair

86.40.96 Lamp - Driving

Remove





1. Release clips securing driving lamp finisher to bumper, collect the finisher.
2. Remove 3 screws securing lamp assembly to bumper.





3. Release lamp assembly from bumper and disconnect multiplug.

NOTE: Do not carry out further dismantling if component is removed for access only.

4. Remove bulb holder from lamp.
5. Remove bulb from bulb holder.

Refit
1. Fit bulb and secure bulb holder to lamp.
2. Connect multiplug.
3. Fit new lamp to bumper and secure with screws.
4. Fit and secure finisher to bumper.