Tail Pipe & Silencer
30.10.22 Tail pipe & silencerRemove
1. Position vehicle on lift.
2. Using LRT-99-027, cut pipe at point indicated by depression in pipe.
3. Remove 8 nuts securing mountings and with assistance, remove tail pipe and silencer assembly.
4. Remove 4 exhaust mountings.
Refit
1. Fit 4 exhaust mountings.
2. Clean intermediate pipe and fit sleeve.
3. With assistance,fit tail pipe and silencer assembly, locate mountings and fit nuts. Tighten nuts to 25 Nm (18 ft. lbs.).
4. Centralize connecting sleeve over joint, align intermediate pipe with tail pipe and tighten sleeve clamp nuts to 48 Nm (35 ft. lbs.).
5. Check exhaust for correct alignment.
6. Connect battery earth lead.
7. Start and run engine to check for leaks.