Operation CHARM: Car repair manuals for everyone.
Hosted by mcallihan.com
Home >> Land Rover >> 2005 >> Range Rover (LM) V8-4398cc 4.4L (M62) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Solenoid >> Service and Repair >> Control Solenoid - Variable Camshaft Control (VCC) - RH

Control Solenoid - Variable Camshaft Control (VCC) - RH

12.30.61 Control solenoid - variable camshaft control (VCC) - RH
Before disconnecting the battery, ensure all text and cautions in the battery disconnection information are observed.

Remove
1. Disconnect battery earth lead.
2. Remove air intake hose.





3. Disconnect multiplug from VCC solenoid.





4. Remove 2 bolts securing VCC solenoid seal and remove seal.





5. Fit LRT-12-226 to VCC solenoid and remove solenoid.

CAUTION: Do not allow oil to come into contact with the drive belts while removing the solenoid.

Refit
1. Fit LRT-12-226 to VCC solenoid and fit solenoid.
2. Tighten VCC solenoid to 25 Nm (18 ft. lbs.) and remove LRT-12-226.
3. Clean VCC solenoid, VCC solenoid seal and mating faces.
4. Lubricate inner mating face of VCC solenoid seal.
5. Fit VCC solenoid seal, fit bolts and tighten.
6. Connect multiplug to VCC solenoid.
7. Connect air intake hose.
8. Connect battery earth lead.
pro multis · About Operation CHARM