Oil Pick Up/Strainer: Service and Repair

12.60.20 Strainer - oil pick up
Before disconnecting the battery, ensure all text and cautions in the battery disconnection information are observed.

Remove
1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Remove lower oil sump.





4. Remove 2 bolts securing oil pick-up strainer to oil pump, remove strainer and discard O-ring.

Refit
1. Clean oil pick up strainer and mating faces.
2. Fit new"O" ring to oil pump groove location, position oil pick-up strainer to oil pump.
3. Fit and tighten 2 bolts securing oil pick-up strainer to oil pump.
4. Fit lower oil sump.
5. Connect battery earth lead.