Foot Rest Finisher - LHD

76.13.24 Foot Rest Finisher - LHD

Remove

1. Remove carpet retainer.







2. Release 4 clips securing inner edge of footrest pad to finisher, roll pad clockwise and remove.
3. Remove bolt securing footrest finisher to body.
4. Lift bonnet lock release handle and withdraw finisher from clips. Pull horizontal and rearward to remove.

Refit

1. Fit finisher to 'A' post and secure with clips.
2. Fit bolt securing footrest finisher to body and tighten to 3 Nm (2.2 lbf.ft).
3. Fit footrest pad and secure clips.
4. Fit carpet retainer.