Center Console

76.25.01 Centre Console

Remove

1. Remove centre console finisher.
2. Remove both centre console closing panels.







3. Remove 2 Torx screws securing large cubby box liner, remove liner.







4. Remove 2 Torx screws securing ignition switch to centre console.
5. Remove 4 Torx screws securing centre console to fascia.







6. Remove 2 Torx screws and collect washers from base of large cubby box.







7. Remove 2 screws securing centre console rear closing panel. Release clips and remove panel.







8. If fitted: Disconnect 2 multiplugs from AVIO module.
9. Raise rear of centre console, disconnect 3 multiplugs from centre console and collect air duct adaptor.
10. Disconnect 3 Lucar connectors from accessory power socket.
11. Carefully remove centre console.

CAUTION: Care must be taken to protect painted and veneered surfaces.

Refit

1. Position centre console and connect multiplugs to rear of console. Fit air duct adaptor and align centre console to mountings.
2. Secure centre console with screws.
3. If fitted: Connect multiplugs to AVIO module.
4. Fit rear closing panel and secure with clips and screws.
5. Position ignition switch and secure with screws.
6. Fit cubby box and secure with Torx screws.
7. Fit both centre console closing panels.
8. Fit centre console finisher.