Solenoid - Motor - Tailgate

Solenoid - Motor - Tailgate

Service Repair No - 86.26.02

Remove
1. Remove tailgate lower trim casing.
2. Remove tailgate latch assembly





3. Disconnect multiplug from solenoid motor.
4. Release cover from tailgate support cable remove Torx bolt, move cable aside and collect solenoid motor.

Refit
1. Position solenoid motor to tailgate ensure latch drive spindle is central to hole. Fit bolt to cable secure motor and tighten to 25 Nm (18 ft. lbs.).
2. Connect multiplug.
3. Fit tailgate latch assembly.
4. Fit lower trim casing to tailgate.