Computer - Navigation From 05MY

86.53.01 Computer - Navigation From 05MY

Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed.

If the navigation computer/unit is to be replaced then Testbook/T4 must be connected and correct procedures adhered to, prior to battery disconnection.

Remove
1. Disconnect battery earth lead.

CAUTION: After switching off the ignition, wait 2 minutes before disconnecting the battery. Failure to wait two minutes will damage the navigation computer.

2. Remove access panel from load space LH trim casing.





3. Remove 4 bolts securing navigation unit and release unit.





4. Disconnect coaxial cable.
5. Disconnect 2 multiplugs from navigation unit.
6. Remove navigation unit.

Refit
1. Position navigation unit and connect multiplugs.
2. Connect coaxial cable.
3. Fit navigation unit into bracket and tighten bolts to 4 Nm (3 lbf.ft).
4. Fit access panel.
5. Connect the battery earth lead.