Muffler: Service and Repair

Tail Pipe & Silencer

Service Repair No - 30.10.22

Remove
1. Raise rear of vehicle.

WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.





2. Loosen tail pipe clamp nut.
3. Release 2 rubber mountings from tail pipe.
4. Remove tail pipe.

Refit
1. Clean mating faces of tail pipe and intermediate pipe.
2. Fit tail pipe and connect rubber mountings.
3. Tighten tail pipe clamp nut to 55 Nm (41 ft. lbs.).
4. Remove stands and lower vehicle.