Trim Casing - Front Door - 3 Door

Trim Casing - Front Door - 3 Door

Service Repair No - 76.34.01

Remove





1. Release cheater panel from front door.
2. Disconnect Lucars and remove cheater panel





3. Remove door pull center trim.
4. Remove 2 screws securing door pull and remove door pull.
5. Remove screw securing door handle escutcheon to door and remove escutcheon.
6. Remove 6 Torx screws securing door casing release casing from 3 studs and sill button and remove casing.





7. Remove 6 speed nuts securing speaker grill and remove speaker grill.

NOTE: Do not carry out further dismantling if component is removed for access only.

8. Remove 3 casing studs.
9. Remove sill button guide.

Refit
1. Position speaker grill and secure with speed nuts.
2. Fit sill button guide.
3. Fit casing studs.
4. Position casing to door, locate sill button and secure in studs.
5. Fit and tighten Torx screws.
6. Fit escutcheon to door handle and secure with screw.
7. Fit door pull and secure with screws.
8. Fit door pull center trim.
9. Connect Lucars to cheater panel and fit cheater panel.