Headlining - 5 Door

76.64.15 Headlining - 5 Door

Remove

1. Remove both 'A' post upper trim finishers.
2. Remove both rear quarter upper trim casings.
3. Remove both sun visors.







4. Remove screw covers and screws from grab handles and remove handles.
5. Remove grab handle blanking plugs.







6. Remove lens from front interior lamp.
7. Remove 2 bolts securing front interior lamp to body.
8. Release interior lamp from headlining, disconnect multiplug and remove lamp.
9. Release rear interior lamp from headlining, disconnect multiplug and remove lamp.







10. Release both 'B/C' post upper finishers and position aside.
11. Release headlining from front and rear door aperture seals.







12. Models with sun roof: Release and remove sun roof surround finisher from sun roof aperture.







13. Remove 5 retaining studs from headlining.
14. With assistance remove headlining through tail door.

NOTE: Do not carry out further dismantling if component is removed for access only.







15. Release 8 tags securing front roof lamp support and remove support.
16. Remove 14 nuts from stowage pockets, collect backing plates and remove stowage pockets.

Refit

1. Position stowage pockets, and backing plates to headlining and secure with nuts.
2. Position roof lamp support and secure retaining tags.
3. With assistance position headlining and secure with retaining studs.
4. Models with sun roof: Position sun roof surround finisher and secure in position.
5. Locate headlining to front and rear door aperture seals.
6. Fit and secure 'B/C' post upper finishers.
7. Position rear interior lamp and connect multiplug.
8. Fit rear interior lamp to headlining.
9. Position front interior lamp and connect multiplug.
10. Fit front interior lamp to headlining and secure with bolts.
11. Fit grab handle blanking plugs.
12. Fit grab handles, tighten screws and fit screw covers.
13. Fit both sun visors.
14. Fit 'A' post upper trim finishers.
15. Fit rear quarter upper trim casings.