Headlining - 3 Door

76.64.15 Headlining - 3 Door

Remove

1. Fold front seat squabs forward.
2. Remove both sun visors.
3. Remove both 'A' post upper trim finishers.







4. Remove 2 screws securing headlining to front end of roof panel.







5. Remove roof lamp lens.
6. Remove 2 screws securing roof lamp to body.
7. Disconnect multiplug from roof lamp and remove lamp.
8. Release clips securing headlining rear finisher to body and remove finisher.







9. Release 3 studs securing rear edge of headlining to roof panel.
10. Remove 4 screws securing headlining to 'B' posts.
11. Release 2 studs securing sides of headlining to body.
12. Lower front edge of headlining.
13. Release headlining from sun roof seal and remove headlining.







14. Remove studs from headlining.
15. Remove 3 screws and remove pocket from headlining.

Refit

1. Fit pocket to headlining and secure with screws.
2. Fit studs to headlining.
3. Position headlining and secure studs to roof panel.
4. Position headlining to 'B' posts and secure with screws.
5. Secure headlining behind rear vent rubbers.
6. Fit headlining rear finisher and secure clips.
7. Fit headlining to sun roof seal.
8. Position roof lamp and connect multiplug.
9. Fit roof lamp and secure with screws.
10. Fit lens to roof lamp.
11. Fit both sun visors.
12. Fit 'A' post upper finishers.
13. Reposition front seat squabs.