Trim Casing - Rear Quarter - Lower - 5 Door

76.13.12 Trim Casing - Rear Quarter - Lower - 5 Door

Remove







1. Release rear seat squab and fold seat forward.
2. Remove Torx bolt securing rear seat belt lower fixing to body and position seat belt aside.
3. Release load space lamp from trim casing.
4. Disconnect 2 Lucars and remove load space lamp.
5. Remove 2 screws securing casing to load space carpet retainer.
6. Release 4 turn buckles securing trim casing.
7. Release trim casing from 5 retaining clips.
8. Remove loadspace side trim casing.







9. Remove 5 retaining clips from trim casing.

Refit

1. Fit retaining clips to casing.
2. Position casing in loadspace, locate and secure retaining clips.
3. Fit turn buckles.
4. Fit screws securing casing to carpet retainer.
5. Position load space lamp to casing, connect Lucars and secure lamp to casing.
6. Position loadspace cover retainer and secure with screw.
7. Fit loadspace cover and secure in retainers.
8. Position rear seat belt and tighten bolt to 40 Nm (29 lbf.ft).
9. Reposition rear seats.