Intermediate Pipe/Silencer

Intermediate Pipe and Silencer

Service Repair No - 30.10.11

Remove

1. Raise vehicle on ramp.





2. Remove 2 nuts securing intermediate pipe/silencer to front pipe.
3. Release 3 nuts securing intermediate pipe/silencer to tail pipe.
4. Release intermediate pipe/silencer from mountings and remove intermediate pipe/silencer.
5. Collect intermediate pipe/silencer to tail pipe gasket.

Refit

1. Clen intermediate pipe/silencer, front pipe and tail pipe mating faces.
2. Position intermediate pipe/silencer and locate on mountings.
3. Using a new intermediate pipe/silencer to tail pipe gasket, align intermediate pipe/silencer with tail pipe and front pipe.
4. Fit nuts to intermediate pipe/silencer and tighten to 25 Nm (18 ft. lbs.).