Drive Cycle D

Drive Cycles

TestBook drive cycles are as follows:

Drive cycle D

1 Switch ignition on for 30 seconds.
2 Ensure engine coolant temperature is less than 35° C (95° F).
3 Start the engine and allow to idle for 2 minutes.
4 Perform 2 light accelerations, i.e. 0 to 35 mph (0 to 60 km/h) with light pedal pressure.
5 Perform 2 medium i.e. 0 to 45 mph (0 to 70 km/h) with moderate pedal pressure.
6 Perform 2 hard accelerations i.e. 0 to 55 mph (0 to 90 km/h) with heavy pedal pressure.
7 Cruise at 60 mph (100 km/h) for 5 minutes.
8 Cruise at 50 mph (80 km/h) for 5 minutes.
9 Cruise at 35 mph (60 km/h) for 5 minutes.
10 Allow engine to idle for 2 minutes.
11 Connect TestBook and check for fault codes.