Airbag - Side Impact - From 99MY

Service repair no - 76.74.31 - Driver's side
Service repair no - 76.74.32 - Passenger's side

Remove


WARNING: See SRS safety precautions before commencement of repair. See SUPPLEMENTARY RESTRAINT SYSTEM, Precautions.


1. Remove squab cover and squab foam as an assembly.







2. Release airbag harness from clip.
3. Remove 2 nuts securing airbag.
4. Release and remove airbag.


WARNING: Store airbag module in accordance with storage procedures. See SUPPLEMENTARY RESTRAINT SYSTEM, Precautions.


Refit


NOTE: If airbag is replaced, bar code of new airbag must be recorded in vehicle handbook.


5. Fit airbag and secure with nuts. Tighten to 5.5 Nm (4 lbf.ft).
6. Route harness through slotted hole in seat frame and secure to clip.
7. Fit squab cover.