Motor - Rise and Fall - Front Seat - From 99MY

MOTOR - RISE AND FALL - FRONT SEAT - From 99MY

Service repair no - 78.70.27

Remove

1. Remove front seat.







2. Disconnect and release multiplug from bracket.







3. Remove roll pin securing motor.
4. Remove spring clip securing operating rod to lever.
5. Release and remove motor assembly.

Refit

6. Clean lever pivot and smear with grease.
7. Position motor assembly and locate operating rod to lever. Fit new spring clip.
8. Align motor and fit new roll pin.
9. Connect multiplug and secure to bracket.
10. Fit seat.