Throttle Cable/Linkage: Service and Repair

Cable - Throttle

Service Repair No - 19.20.06

Remove





1. Release 3 fasteners and remove drivers side closing panel and move aside.





2. Release inner cable from throttle pedal.
3. Release outer cable from bulkhead.





4. Release outer cable from clip, loosen lock nuts and remove outer cable from abutment bracket.
5. Release inner cable from operating lever and remove cable.

Refit

1. Position cable, secure to bulkhead and connect inner cable to throttle pedal.
2. Position inner cable to operating lever and connect outer cable to abutment bracket and retaining clip.
3. Position closing panel and secure fasteners.
4. Adjust throttle cable.