Heat Shield - Brake Servo - With Secondary Air Injection

Heat Shield - Brake Servo - With Secondary Air Injection

Service Repair No - 30.10.48

Remove

1. Release fixings and remove battery cover.
2. Disconnect battery negative lead.





3. Remove nut securing heat shield bracket to valance.





4. Remove 2 bolts securing heat shield and remove heat shield.

Refit

1. Fit heat shield, tightening bolts to 25 Nm (18 lbf. ft) and nut to 10 Nm (7 lbf. ft).
2. Connect battery negative lead.
3. Fit battery cover and secure with fixings.