Amplifier: Service and Repair

Amplifier - Power

Service repair No - 86.50.36

Remove

1. Release fixings and remove battery cover.
2. Disconnect battery earth lead.







3. Remove 3 screws and 1 trim clip securing lower trim casing to LH front seat.
4. Remove lower trim casing.
5. Move seat fully rearwards.







6. Remove 3 nuts securing power amplifier mounting bracket to body.
7. Release mounting bracket and, if applicable, disconnect multiplug from EAT ECU on underside of bracket.
8. Disconnect multiplug from power amplifier.







9. Remove 3 screws securing power amplifier to mounting bracket and remove power amplifier.

Refit

1. Fit power amplifier to mounting bracket and secure with screws.
2. Position power amplifier and mounting bracket to body and connect power amplifier multiplug. If applicable, also connect EAT ECU multiplug.
3. Fit bracket to body mountings and secure with nuts.
4. Position lower trim casing to seat and secure with fixings.
5. Connect battery earth lead.
6. Fit battery cover and secure with fixings.