Rear Wiper Motor

Rear Wiper Motor

Service Repair No - 84.35.12

Remove
1. Remove wiper arm nut cover. Remove nut.





2. Remove wiper arm from motor spindle.
3. Remove motor spindle cover, retaining nut and seal.





4. Open tailgate.
5. Remove 6 screws securing wiper motor cover.





6. Disconnect motor multiplug.





7. Remove 2 bolts securing motor. Remove motor.
8. Remove 4 bolts securing mounting plate to motor.
9. Release multiplug holder. Remove mounting plate.
10. Remove sealing rubber from motor spindle.






Refit
11. Fit sealing rubber to motor spindle.
12. Fit mounting plate. Secure with bolts.
13. Connect multiplug holder to mounting plate.
14. Position motor. Secure with bolts. Tighten to 7 Nm (5 ft. lbs.)
15. Connect multiplug.
16. Position motor cover. Secure with screws.
17. Close tailgate.
18. Fit motor spindle seal. Fit retaining nut. Tighten to 4 Nm (3 ft. lbs.) Fit cover.
19. Position wiper arm. Secure with retaining nut. Tighten to 17 Nm (l2 ft. lbs.) Fit cover.