Removal of Existing Bracket

1. Remove sub-woofer/CD player trim cover following directions outlined in WSM section 76 (Figure 1).





2. Disconnect power connector from side of CD player. (Figure 2)

3. Remove four mounting bolts from side of CD player.

4. Remove CD player.





5. Remove two 5 mm nuts from sub-woofer upper mounting location. (Figure 3)

6. Remove two 6 mm bolts from floor mounting location.

7. Disconnect sub-woofer amplifier block connector.

8. Remove sub-woofer assembly from its location.

9. Remove six self tapping screws from underside of sub-woofer and separate CD bracket from sub-woofer assembly