Front Windows

Front Windows
In order for the windows to operate the ignition switch must either be in position II, or in the off position with the ignition switched-off timeout operational.

The front window switches provide ground signals to the BCU, which operates the windows.

One-touch down operation
The front windows will open completely with a single touch on the window down switch.

In order for the one-touch down to operate, the following conditions must exist:
^ Ignition switch in position II, or in the off position with the ignition switched-off time out operational.
^ Front window switch pressed for less than 0.4 second.

When the front window down switch is pressed for less than 0.4 second, the window opens completely. Pressing the window up switch for less than 0.2 second stops the movement of the window. The BCU stops one-touch down operation when it detects window stall current or after 10 seconds of window operation.

Depending on market, one-touch down operation can be fitted on both front windows or on the driver's side only.