Seal - Valve Body

Seal - Valve Body

Service Repair No - 44.20.13

Remove

1. Remove valve body assembly





2. Remove circlips and springs from gearbox casing noting location of long and short springs.
3. Using tool LRT-44-005, remove and discard seals from gearbox casing.

Refit

1. Clean gearbox casing, springs and circlips.





2. Fit new seals using tool LRT-44-005, ensure seals are fully seated.





3. Position springs in their correct locations and secure with circlips.
4. Fit valve body assembly