Air Injection Control Valve: Service and Repair

Control Valve - Secondary Air Injection (SAI)

Service Repair No - 17.25.02

Remove





1. Release clip and disconnect air hose from valve.
2. Disconnect vacuum hose from valve.
3. Remove 2 bolts securing valve to air manifold
4. Remove valve and discard gasket.

Refit

1. Clean SAI control valve and mating face on manifold.
2. Fit new gasket and fit valve. Tighten bolts to 10 Nm (7 ft. lbs.).
3. Connect vacuum hose.
4. Connect air hose and secure with clip.