Blower Motor Assembly - Rear

Blower Motor Assembly - Rear

Service Repair No - 82.26.33

Remove

1. Remove rear lower trim casing.







2. Remove 5 bolts securing third row seat support bracket and remove bracket.







3. Disconnect blower motor multiplug and release hose from casing.
4. Remove screws securing blower motor and remove motor from casing.

Refit

1. Position motor, align to casing and secure with screws.
2. Connect motor multiplug and secure hose to Casing.
3. Position seat support bracket, fit bolts and tighten to 24 Nm (18 ft. lbs.)
4. Fit rear lower trim casing.