Luggage / Roof Rack Frame: Service and Repair

76.11.31 Roof Bars

Remove

1. Remove headlining.







2. Models with rear A/C: Drill out 4 rivets securing rear centre duct to roof.
3. Models with rear A/C: Release and remove rear centre duct.







4. Models with rear A/C: Drill out 2 rivets securing each upper side duct to roof.
5. Models with rear A/C: Remove upper side ducts.







6. Remove 2 nuts securing each roof bar to roof.
7. Remove roof bars and collect foam pads from each end.

Refit

1. Fit roof bars to roof, ensuring foam pads are correctly located.
2. Fit nuts securing roof bars to roof and tighten to 32 Nm (24 lbf.ft).
3. Models with rear A/C: Fit upper side ducts and secure with rivets.
4. Models with rear A/C: Fit rear centre duct and secure with rivets.
5. Fit headlining.