Front Door Latch and Motor

Remove
1. Remove front door frame.
See Windows and Glass, "Windows / Window Glass." Window Glass





2. Release exterior handle control rod from latch.
3. Release and disconnect sill button lock rod from latch.
4. Disconnect multiplug from motor.
5. Remove 3 Torx screws securing latch and motor assembly to door.
6. Remove latch and motor assembly through aperture in the lower section of the door.





7. Disconnect release cable from latch and remove latch and motor assembly.

Refit
1. Connect release cable to latch.
2. Position latch and motor assembly to door. Fit Torx screws securing latch to door and tighten to 7 Nm (5.2 ft. lbs.).
3. Connect multiplug to motor.
4. Connect exterior handle control rod to latch.
5. Connect sill button lock rod to latch.
6. Fit front door frame.
See Windows and Glass, "Windows / Window Glass." Window Glass