Receiver - Alarm System - Models With Sunroof

Receiver - Alarm System - Models With Sunroof

Service Repair No - 86.77.31

Remove

1. Remove trim seal from rear sunroof.
2. Release sunroof switch and remove screw securing headlining.







3. Remove 2 nuts securing receiver to roof panel, disconnect multiplug and remove receiver.

Refit

1. Connect multiplug to receiver, fit to roof panel, tighten nuts to 10 Nm (7 ft. lbs.).
2. Fit and tighten screw securing headlining.
3. Fit sunroof switch
4. Fit sunroof trim seal.
5. Connect multiplug to receiver, fit to roof panel and secure with nuts tighten to 10 Nm (7 ft. lbs.).