Fluid - A/T: Testing and Inspection

- Fill gearbox with recommended oil to bottom of oil level/filler plug hole. Refer to "Automatic Transmission/Transaxle : Fluid-A/T". Specifications
- Select 'P' (Park).
- Ensure hand brake is applied.
- Start engine and allow it to idle.
- Apply foot brake.
- Move selector lever through all gear positions, select 'P' (Park).
- With engine idling, continue filling gearbox until oil runs from oil filler/level plug hole.
- Stop engine.
- Fit new sealing washer to automatic gearbox filler/level plug, fit plug and tighten to 30 Nm (22 lbs.ft).
- Remove all traces of oil from gearbox casing.