Distributor: Description and Operation

Distributor

A Lucas 35DLM8 distributor is employed. This has a conventional vacuum advance unit and centrifugal automatic advance mechanism.

A pick-up module, in conjunction with a rotating timing reluctor inside distributor body, generates timing signals. These are applied to an electronic ignition amplifier module mounted on side of distributor body.


NOTE: Pick-up air gap is factory set. Do not adjust gap unless pick-up is being changed or base plate has been moved. Use a non-ferrous feeler gauge to set air gap.







Service parts

1. Cap
2. HT brush and spring
3. Rotor arm
4. Insulation cover
5. Pick-up module and base plate assembly
6. Vacuum unit
7. Amplifier module
8. 'O'-ring oil seal
9. Gasket