Air Flow Meter/Sensor: Service and Repair

Remove
1. Disconnect battery negative lead.







2. Loosen clip and disconnect intake hose from MAF sensor.
3. Disconnect multiplug from MAF sensor.
4. Release 2 clips and remove MAF sensor from air cleaner.
5. Collect 'O' ring seal.

Refit
6. Ensure mating faces of air cleaner, MAF sensor and intake hose are clean.
7. Fit 'O' ring to MAF sensor.
8. Fit MAF sensor to air cleaner and secure with clips.
9. Connect multiplug to MAF sensor.
10. Connect intake hose and secure with clip.


CAUTION: Failure to connect intake hose securely will allow unmetered air to enter the engine, causing running problems.


11. Reconnect battery negative lead.