Blower Motor - Rear

Blower Motor - Rear

Remove
1. Remove evaporator/blower motor assembly







2. Loosen 2 screws securing high pressure control valve solenoid to blower motor housing.
3. Disconnect multiplug from blower motor.
4. Release blower motor cooling tube from evaporator/blower motor housing.
5. Remove 3 screws securing blower motor.
6. Remove blower motor.

Refit
7. Position blower motor to housing and secure with screws.
8. Secure blower motor cooling tube from evaporator/blower motor housing.
9. Connect multiplug to blower motor.
10. Tighten screws securing control valve solenoid.
11. Fit evaporator/blower motor assembly.