Trim Panel, Rear Door Upper - With Rear Air Conditioning Fitted

Trim Panel, Rear Door Upper - With Rear Air Conditioning Fitted

Remove
1. Remove alpine light trim casing.







2. Release 2 trim panel retaining screw covers.
3. Remove 2 trim panel retaining screws.
4. Release rear edge of trim panel from body.
5. Remove screw securing rear header duct to alpine light duct.
6. Release rear header duct from alpine light duct.
7. Remove trim panel assembly.

Dismantle
8. Remove 2 vents from trim panel.
9. Remove screw securing rear header duct to trim panel.
10. Remove rear header duct.

Rebuild
11. Fit rear header duct to new trim panel and secure with screw.
12. Fit vents to trim panel.

Refit
13. Position trim panel and connect rear header duct to alpine light duct.
14. Fit and tighten screw securing rear header duct to alpine light duct.
15. Secure rear edge of trim panel to body.
16. Fit and tighten screws securing trim panel.
17. Secure trim panel retaining screw covers.
18. Fit alpine light trim casing.