Oil Pressure Sender: Service and Repair

OIL PRESSURE SWITCH
Service repair no -12.60.50

Remove
1. Disconnect battery negative lead. Remove cooling fan.
2. Remove alternator drive belt tensioner.






3. Disconnect Lucar from oil pressure switch.
4. Remove switch and discard O-ring.

Refit
5. Ensure switch thread and seating in front cover are clean.
6. Lubricate new O-ring with clean engine oil. Fit to switch.
7. Fit switch. Tighten to 15 Nm (11 ft. lbs.)
8. Refit alternator drive belt tensioner.
9. Fit cooling fan.
10. Reconnect battery negative lead.